ballIonization

Thank you again for the Opportunity to share with you the many Benefits of using one of our fine ChlorFree Pools & Spas products.

You’ll find that ChlorFree offers an Easier way to maintain your pool. You’ll enjoy the many benefits and will clearly see the difference ChlorFree Ionization gives life to your pool.

 

Within the first week after installing ChlorFree you will notice the color of the water of your pool darken to a “Richer-Bluer Color”. You will notice that the water will look much Cleaner, Feels Softer, and those who enjoy your pool will especially appreciate how ChlorFree’s Ionization eliminates the harmful effects from exposure to CHLORINE and other Dangerous Chemicals. You’ll no longer feel how CHLORINE (use to) irritate­your-eyes, dries-your-skin, bleaches your hair and clothing and most importantly, how CHLORINE damages the pool, pumps and your pool equipment.

 

For the BEST results, please follow the enclosed directions (also found on our website) closely and remember to keep your Pool pH (acid) level at 6.8 to 7.2 (bright orange to yellow) and Jacuzzi’s pH 7.4-7.6. If it's higher, add Muriatic acid (1-gallon per 100,000-gallons of water) every day until the pH reaches 6.8. Muriatic acid can be purchased at any hardware store and it's much less expensive and slightly more concentrated (and safer to handle) than "Pool Store" chemical prices. Remember to run your pump at least 3 – 4 hours every day and clean (backwash) your filter at least 1 time per week.

 

The ChlorFree System performs exactly as stated, reducing or eliminating CHLORINE. You, your family and guests will all appreciate the many benefits of using ChlorFree.

 

 

Brief History of Ionization:

Use of Iodine and Chlorine has been common for about the last 100 years. One problem with Chlorine use is that it can extract high concentrations of lead out of water pipes, which can cause health problems from lead poisoning, such as potential brain damage. Before that, up to 450 years ago, copper and silver were used at times, on a crude basis, in attempts to purify water. Today, we’re improving the ancient technology.

 

USA EPA:

Allows Copper saturation of 1.3 ppm

Allows Silver saturation of .04 ppm

 

UPA (Europe):

Allows Copper saturation of  3.0 ppm

Allows Silver saturation of 0.4 ppm

 

ChlorFree: 

Copper saturation will not exceed 0.20 ppm

(We can regulate a clean or dirty environment, but can’t take excess copper out if it is excessively saturated).

Silver saturation will not exceed 0.01 ppm

 

Silver:

Attacks and kills viruses (more difficult to kill than bacteria).  Viral skin is imperious to salmonella and to conjunctivitis (pink eye) from urine.

Zinc:

Sacrificial anode. (Soft) Dissolves and serves as regulator to modify copper

Palladium:

Efficient conductor. Acts as catalyst to boost ionization.  Increases voltage.  Allows less material to be used and lessens saturation of copper into water.

Carbon:

Activated Carbon allows for the absorption of Free-Chlorine.  Carbon also allows for ionization porosity which was exclusively developed by ChlorFree.